- ماژول محصولات - تجهیزات شبکه - تجهیزات شبکه کابلی و فیبرنوری - MIKROTIK - SWITCH

MIKROTIK CRS212 1G10S1S+IN
قیمت : تماس تلفنی

~~تماس تلفنی~~
CPU:400 MHz - RAM:64MB - LAN:1port GIG- Fiber:10Port SFP,1Port SFP+ - OS-level-5
0

0
وضعیت : تماس تلفنی تعداد نامشخص
بازدید این صفحه : ۷۱۳

تاریخ نشر : 19 خرداد 1395

بزرگنمایی

CRS212-1G-10S-1S+IN

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack.
Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

Product specifications

Details
Product code	CRS212-1G-10S-1S+IN
CPU nominal frequency	400 MHz
CPU core count	1
Size of RAM	64 MB
10/100/1000 Ethernet ports	1
Power Jack	1
Supported input voltage	8 V - 30 V
Voltage Monitor	Yes
PCB temperature monitor	Yes
Dimensions	200x144x47mm
Operating System	RouterOS
Operating temperature range	-35C to +35C tested
License level	5
Current Monitor	Yes
CPU	QCA8519
Max Power consumption	20W
SFP ports	10
SFP+ ports	1
Serial port	RJ45
Storage type	NAND
Storage size	128 MB

Switching results

CRS212-1G-10S-1S+IN
Mode	Configuration	64 byte		512 byte		1518 byte
Mode	Configuration	kpps	Mbps	kpps	Mbps	kpps	Mbps
Switching	Non blocking Layer 2 throughput	31,250.0	16,000.0	4,934.2	20,210.5	1,706.8	20,726.9
Switching	Non blocking Layer 2 capacity	31,250.0	32,000.0	4,934.2	40,421.1	1,706.8	41,453.8
Switching	Non blocking Layer 1 throughput	31,250.0	21,000.0	4,934.2	21,000.0	1,706.8	21,000.0
Switching	Non blocking Layer 1 capacity	31,250.0	42,000.0	4,934.2	42,000.0	1,706.8	42,000.0

Performance test results

CRS212-1G-10S-1S+IN		QCA8519 Max possible throughput test
Mode	Configuration	1518 byte		512 byte		64 byte
Mode	Configuration	kpps	Mbps	kpps	Mbps	kpps	Mbps
Bridging	none (fast path)	26.7	324.2	28.6	117.1	24.5	12.5
Bridging	25 bridge filter rules	21.4	259.9	22.4	91.8	22.2	11.4
Routing	none (fast path)	23.0	279.3	23.5	96.3	24.5	12.5
Routing	25 simple queues	19.6	238.0	22.4	91.8	21.0	10.8
Routing	25 ip filter rules	7.9	95.9	10.4	42.6	10.8	5.5

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results